CHLORINATED RUBBER PAINTS & COATINGS (YC SERIES)

chlorinated rubber based paints are single component & hardened by evaporation of solvent. They posses a very good resistance against weathering ,chemicals, sea water & oxidizing agents, e.g. chlorine vapors, but they are weak in solvent & oil resistance. The anti-corrosion paints based on them have excellent adhesion with short drying time & they are non-toxic for applying on metal. It is better that the substrate to be very well prepared & preferably the use of wash primer is suggested. One of the advantages of this kind of paints is their very good over painting & in contrary to epoxy paints they are usable in low temps. They are applicable by spraying & brushing and due to their sensitivity to elevated temps they must be stored in temps lower than 50'c.

NO	TYPE	Min.layer thickness (Micron)	Min.interval between two layers (h)	Surface, Tack-free through drying time (h)
1	Chlorinated rubber based red iron oxide under coat	50	4	24-3-0.5
2	Chlorinated rubber based zinc chromate under coat	50	4	24-3-0.5
3	Chlorinated rubber based middle paint layer	75	8	18-3-3.4
4	Chlorinated rubber based gloss & semi-gloss top coats in different shades	50	10	18-3-3.4

Application:

Strong anti-corrosion paints in chemical plants, industrial environments, bridges & sewage channels, marine & off-shore foundations, steel structures, swimming pool, ware houses & tanks, cement, concrete and metal plating plants.

HOME / ABOUT US / PRODUCTS / CONTACTS