ALKYD AIR DRYING PAINTS & COATINGS (YA SERIES)

 

Sanne Yekta's air drying coating covers a wide range of single component coatings which dry by air & they are available in two following groups :
1- AIR DRYING DECORATIVE PAINTS (YAR SERIES)

These coatings are single component and dry by air oxidation. These paint films produce hard films with excellent adhesion and they are usable on all metallic, aluminum and wooden surfaces, these paints don't need good substrate surface preparing can be applied even on surfaces which are prepared by only brushing & sand paper. They have good weathering resistance, but due to specification by water, not suitable for surfaces immersed in water and solvent because these paints dry by air oxidation. The drying time depends on temp. So this must be reminded on repainting. That in repainting, for good interlayer adhesion, it must be done within three days.

 
NO TYPE

Min. layer thickness

(Micron)

Min. interval between two layers

(Min.)

Surface-Deep Complete

drying time (h.)

1 Red Iron oxide alkyd (anti-corrosion) under coat 50 12 1 - 3 - 24
2 Zinc chromate alkyd (anti-corrosion) 50 12 1 - 3 - 24
3 Alkyd middle layer paint 40 24 3 - 6 - 24
4 Gloss, semi-gloss & matt alkyd top coat in different shades 40 24 3 - 7 - 24
 
 
APPLICATION :

Anti-corrosion under coat, industrial machineries, radiators, suitable for fair weather conditions.

 
2- RAPID AIR DRYING PAINTS & COATINGS (YAF SERIES)

These coatings are single component and dry by air oxidation. These paints posses short drying time and produce films with excellent adhesion, hardness, gloss and good weathering resistance. They are usable for all metallic surfaces and applicable by spraying.

 
NO TYPE

Min. Layer thickness

(Micron)

Min. interval between two layers

(Min.)

Surface-Deep Complete

drying time (h.)

1 Alkyd rapid air drying under coats 50 4 16-1-1.4
2 Alkyd rapid air drying middle layer 50 4 16-2-1.2
3 Alkyd rapid air drying gloss & semi-gloss top coat in different shades 30   24-4-1
4 Air dry hammer finish (8.Y) 50   2-1.2-1.4
 
 
APPLICATION :

Anti-corrosion undercoats & paints, agricultural & industrial machineries, hammer finishes for office metallic facilities, paints for radiators, suitable for fair condition.

 
 
 
[Sanne Yekta © 2007]

HOME / ABOUT US / PRODUCTS / CONTACTS